The Australian SAA certification (Standards Australia Certification) is a key product safety certification system in Australia, designed to ensure that products entering the Australian market comply with local safety standards, safeguarding consumer and environmental safety. The following is core information about SAA certification:

1. Basic Definition

SAA certification is led by Standards Australia, but the association does not directly issue certificates. Instead, it authorizes third-party certification bodies (such as SGS, Intertek, TÜV, etc.) to conduct testing, auditing, and issue certification. The certification covers product safety performance, ensuring compliance with Australian or Australia/New Zealand joint standards (AS/NZS standards).

2. Applicable Product Scope

SAA certification primarily targets electrical, electronic, and gas products, common categories include:


  • Household appliances (refrigerators, air conditioners, washing machines, etc.);

  • Lighting equipment (luminaires, LED products, etc.);

  • Power tools (electric drills, cutting machines, etc.);

  • Wires, cables, plugs and sockets;

  • Information technology equipment (computers, printers, etc.);

  • Gas appliances (gas stoves, water heaters, etc.).

3. Certification Nature: Mandatory vs. Voluntary

  • Mandatory certification: Certain high-risk products (such as electrical equipment and gas appliances) must pass SAA certification before being sold in Australia, which is a legal mandatory requirement (regulated by the Electrical Equipment Safety Act, Gas Safety Act, etc.).

  • Voluntary certification: Low-risk products may voluntarily apply for SAA certification to enhance market recognition.

4. Relationship with the RCM Mark

Currently, the Australian market more commonly uses the RCM Mark (Regulatory Compliance Mark), which is a joint compliance mark for Australia and New Zealand, covering electrical safety, electromagnetic compatibility (EMC), radio, and other requirements.


  • The SAA certification test report is one of the core bases for obtaining the RCM mark (it must demonstrate that the product complies with AS/NZS safety standards);

  • Once a product bears the RCM mark, it can enter both the Australian and New Zealand markets without requiring duplicate certification.

5. Certification Process

  1. Determine standards: Identify the applicable AS/NZS standard for the product (e.g., AS/NZS 60335 for household appliances, AS/NZS 60598 for luminaires);

  2. Select a body: Apply through an SAA-authorized third-party body (such as SGS, Intertek);

  3. Submit documentation: Including product manuals, circuit diagrams, component lists, factory information, etc.;

  4. Testing and sampling: Submit product samples to an accredited laboratory for safety testing (such as electric shock protection, fire resistance, temperature resistance, etc.);

  5. Audit and issuance: After passing testing, the body audits the documentation and issues the SAA certificate of approval;

  6. Post-certification maintenance: If standards are updated, retesting or certification renewal may be required.

6. Validity and Fees

  • Validity: The certificate is valid long-term, but standard updates must be tracked (if AS/NZS standards are revised, re-compliance is required);

  • Fees: Costs vary significantly depending on product type, testing items, and the certifying body, typically ranging from several thousand to tens of thousands of RMB.

Important Notes

  • Importers/suppliers bear compliance responsibility and must ensure that products have passed certification and that test reports can be provided;

  • Individual Australian states may have additional requirements (e.g., electrical products may need to be registered in the EESS system), which should be confirmed in advance;

  • Avoid confusing the “old SAA mark” with the “RCM mark”: after 2013, the RCM gradually replaced the old SAA mark and became the mainstream compliance mark in the market.


For certification details on specific products, it is recommended to consult an SAA-authorized body directly to ensure compliance with the latest regulatory requirements.